Igneous-sports
Spiroll Rope Protector - Black
Spiroll Rope Protector - Black
Regular price
£18.99 GBP
Regular price
Sale price
£18.99 GBP
Unit price
per
Tax included.
Shipping calculated at checkout.
Couldn't load pickup availability
Spiroll Rope Protector - BlackBuilt from rugged and durable polyurethane, the Spiroll® employs a patented technology that allows it to automatically wrap itself around a rope and provide long term chafe protection. With minimal bulk, minimal weight, but maximum resiliency, the Spiroll® product line protects dock lines, mooring lines, rigging lines, climbing ropes and professional ropes with unmatched versatility.
Spiroll® Rope Protectors employ a unique technology whereby the device’s rugged polyurethane material wraps snugly around a rope several times to secure itself in place. Spiroll® Rope Protectors are easily placed anywhere on a rope and then positioned into the desired location.
They will accommodate all rope sizes and will not slide down a rope (ropes >9.5mm; ropes with smaller diameters should be tied off with a small cord through the integrated punch hole on unit).
Application takes less than 20 seconds.
Specifications:Material: PolyurethaneLength: 23.5? (59.7cm)Weight: 57gUltimate Tensile Strength: 10,000 PSIUltimate Elongation: 450%Vicat Softening Point: 92º CROPE PROTECTORS WARNING: Climbing is a dangerous sport. Severe injury and even death can result from improper technique or misuse of equipment. Spiroll® Rope Protectors (patent pending) will not enhance safety or rope integrity; they are intended solely to help protect ropes from abrasion, thus lengthening a rope’s useful life. Spiroll® Rope Protectors are not a substitute for correct technique, skill, and properly maintained equipment. Seek qualified instruction before climbing.
Wrap Spiroll® Rope Protector around rope as shown in (Fig. 1). Important: the black stripe must face out to ensure proper fit, as shown in (Fig. 2). With Spiroll® in place, slide into desired position, as shown in (Fig. 3). Two or more overlapping Spiroll® protectors can be used in tandem for expanded coverage (Fig. 3).
IMPORTANT: Always verify unit placement/location on rope before and throughout climbing. Unit movement on rope might be experienced under various environmental conditions (ice, wet ropes, etc.), an increase in Spiroll® unit diameter, and/or use on ropes having diameters less than 10mm (approximately); tie off with separate chord if necessary. Rope/anchor movement must be avoided. Spiroll® protectors only partially protect ropes from abrasive surfaces in the immediate vicinity, and will offer no protection against crushing forces and/or rope/anchor failure. Keep Spiroll® protectors away from excessive heat, harsh chemicals, and corrosive solvents. Spiroll® protectors and rope must be inspected after every use for ware. Replace Spiroll® protectors if damaged or worn.
Wrap Spiroll® Rope Protector around rope as shown in (Fig. 1). Important: the black stripe must face out to ensure proper fit, as shown in (Fig. 2). With Spiroll® in place, slide into desired position, as shown in (Fig. 3). Two or more overlapping Spiroll® protectors can be used in tandem for expanded coverage (Fig. 3).
IMPORTANT: Always verify unit placement/location on rope before and throughout climbing. Unit movement on rope might be experienced under various environmental conditions (ice, wet ropes, etc.), an increase in Spiroll® unit diameter, and/or use on ropes having diameters less than 10mm (approximately); tie off with separate chord if necessary. Rope/anchor movement must be avoided. Spiroll® protectors only partially protect ropes from abrasive surfaces in the immediate vicinity, and will offer no protection against crushing forces and/or rope/anchor failure. Keep Spiroll® protectors away from excessive heat, harsh chemicals, and corrosive solvents. Spiroll® protectors and rope must be inspected after every use for ware. Replace Spiroll® protectors if damaged or worn.
